Helmet & Accessory LockUp

LockItt Home

Back to Helmets Locks


1. Take a bolt out anywhere on your bike. Replace it with an equivalent socket head cap screw. Slide it through our washer, use loctite on the threads and secure the washer to the motorcycle.
2. Insert the "L" shaped end of the cable through the "D" rings, webbing or face of a helmet, or with the longer cables run it up the sleeve of a jacket or accessories then back through the other end of the cable, then into the slot of either side of the Bold Lock.
3. When you insert the end into the slot rotate the end 90 deg. so that the end is pointing clockwise. Now turn the key 90 deg. Clockwise which locks the cable to the Bolt Lock. Next slide the Bold Lock over the flange on our washer as shown to the left.
If you look at the picture to the left, you will notice two keyouts (dark rectangles) in the center of the lock, one pointing to the left, and one pointing up. The one pointing up is the fully locked position which is where you can take the key out of the lock and both cables will be locked and the Bolt Lock itself will be locked to the washer.

If you insert the key in the fully locked position then turn the key clockwise (CW) 90 deg. The slot on the right is open. Another 90 deg. CW opens the Bolt Lock so you can slide it over the washer. Another 80 deg. CW opens the left slot. The final 90 deg. CW you are back to the fully locked position.

Note that the "L" shaped ends in the picture to the left are shown on the outside of the lock to show how the ends should be pointing in the fully locked position.

BOLT LOCK

The Helmet Lock which is also a Jacket Lock and works great as an Accessory lock it is called the Bolt Lock!
bullet High quality chrome or finish
bullet Mounts anywhere on any bolt on your bike.
bullet Longer cables available (standard kit has 12" cable)
bullet 2 keys supplied
bullet Proudly made in USA
 
$ 59.95

All NEW Shipping Rebate offer available
(see Order information page for details)
Additional FREE product or Savings offered at checkout for all orders over $30.00
Bolt Lock is a truly innovative helmet and gear locking solution. It works by mounting a, nice looking chrome, machined washer on your bike. Anyplace on your bike where you have or can mount a bolt. The lock housing accepts the cable and locks onto the washer. Different length cable is available. It is not necessary to keep the lock on the bike when not in use. This way, while riding, all you see is the very unobtrusive chrome washer.

Home

Security
Essential Accessories Essential Rider Wear Eye Wear Heated Clothing Heated Grips
 Helmet Holders & Locks  Lock Mounts Motorcycle Covers  Tie-Downs
Paint Protection Lock Reminder Products

By Manufacturer - Brand
ABUS Locks Armed Guard BatteryDoc CTek Canyon Dancer Cyclone
Condor Bike Stands CurvZ CrampBuster Dowco Covers Dowco Luggage
Heat Troller Heaterz HotGrips Garny Goggles Gorilla Alarms
Kryptonite Kuryakyn Luggage Kuryakyn Covers Kuryakyn Chrome Safeman
OnGuard Locks Oxford Luggage PowerTye ROK Straps
Taffynackles Anchors Throttle Rocker VentureHeat
Willie & Max Luggage Xena Security

Other pages

About us Basket & Checkout Contact us Links page Order Information Page
Search for Product Security tips & Advice  Shows & Events
Subscribe to our Newsletter Table of Contents
Copyright © 2000 - 2005 [Patrick Denayer]. All rights reserved.
Revised: August 16, 2010 .