 |
RUMBLE PACK
Seatpack |
Features:
- Sleek,
aerodynamic profile.
- Expandable main
compartment doubles in size to hold full-face helmet.
- Convenient
outside pocket for gloves, maps, glasses.
- Adjustable,
hideaway, four-point bungee mounting system.
- Tailored handle
for carrying comfort off the bike.
- Reflective
striping.
- Inside mesh
pocket.
- Holds its shape
with a wraparound polyethylene stiffener panel.
- Raincover
included.
|
|
|
Rumble Pack Seatpack
on Buell X1
|
Specifications:
- Unexpanded: 12"
long x 11" wide x 7"deep
- Expanded: 12"
long x 11" wide x 12" deep
- Volume: 11 liters
to 20 liters; 650 to 1200 cubic inches
|
PLEASE READ THE MOUNTING PROCEDURE ENTIRELY BEFORE PROCEEDING WITH YOUR
INSTALLATION. ECLIPSE ASSUMES NO LIABILITY FOR THE IMPROPER MOUNTING OR USE OF
THIS PRODUCT |
Mounting Instructions
|
1. |
Place the Rumble
Pack Seatpack on the seat where you intend to mount it. Make sure that the
reflective striping faces the rear. |
| 2. |
|
Open the main
compartment of the Rumble Pack. Remove the bottom stiffener panel to expose the
bungee cord and the cordlock. Loosen the bungee cord enough so the four harness
J-hooks can be easily attached under the seat, seat frame, or the appropriate
location. See Figure 1. |
|
| Note:
|
To loosen the
bungee, just pull on the ring tab of the cordlock. See Figure 2.
| |
| 3.
|
|
Slowly and
carefully tighten the bungee. As you start shortening the harness loop be sure
the four harness J-hooks have, and maintain, a secure grip around whatever
framework they are attached over or around. |
|
| Note:
|
To tighten the
bungee loop, grasp both ends of the bungee cord firmly in one hand and slide the
cordlock down with the other hand.
| |
| 4.
|
|
Once the Rumble
Pack has been mounted securely, the bungee cord ends and the cordlock can be
tucked under the bottom stiffener panel. |
| |
SPARE PARTS
When ordering replacement and/or spare parts for the Rumble Pack
Seatpack, please refer to the following numbers:
| 301-104 |
Raincover |
| 399-109 |
Adjustable
Mounting Kit |
|
IMPORTANT!
Follow installation instructions using ONLY Eclipse
mounting hardware to ENSURE SAFETY! If you need help….please CALL US!
|
Please Note
The Eclipse Rumble Pack Seatpack is constructed
to carry normal touring loads. Please use common sense when loading this pack,
and do not exceed the G.V.W. rating of your motorcycle. Eclipse, Inc. assumes no
liability for the improper mounting or use of the product.
Service
Because
every Eclipse product is built for years of use, our equipment can be easily
off-mounted for periodic cleaning, maintenance, or adjustment. It takes more
time and costs more to make our products this way, but it means your equipment
will last longer.
Cleaning
If
soiled, any Eclipse product can be disassembled and washed or dry cleaned. Use a
mild detergent in cold water on the gentle cycle. DO NOT machine dry. (Note that
repeated cleaning will deteriorate the fabric's waterproof
coating.)
Eclipse Warranty
If an Eclipse product should ever become
unsatisfactory due to a defect in materials or manufacturing*, call us for
instructions to return it with a dated proof of purchase for prompt repair or
replacement, at our option. This warranty applies to Eclipse branded products
and is given to the original purchaser only. Altered products will void
warranty. Warranty coverage requires that items be returned to Eclipse, without
modification, before final disposition of the warranty is assessed.
|
BEFORE RETURNING AN ECLIPSE PRODUCT, CALL 1-888-lockitt FOR A RETURN
AUTHORIZATION (RA) NUMBER, AND INSTRUCTIONS.
|
| *Excludes
normal wear and tear, damage by common carrier, consequential damage, or
customer neglect or abuse. | |
