Heat Trollers Coax Plug

LockItt Home

Back to Accessories main page

Heated Grips

Heated Clothing

Heat Trollers

Coax Plug Heat-troller ™

Max Load in Standard Configuration - 15 amp at 13.8 volt
Flashing L.E.D. provides Visual Feedback
Coax DC Connectors based WarmNsafe's own design
Single Coax Heat-Trollers
For Heated Clothing		 Dual Coax Heat-Trollers
For Heated Clothing

SINGLE Coax Plug Heat-troller ™

Single Portable Coax Heat-troller

Technical Specifications: Size - 1.5 in x 2.25 in x .85 in or 38 mm x 57 mm x 21.5 mm.
Comes with battery harness with covered fuse holder.

Use with heated liner or gloves, with coax connector, up to a maximum draw of 15 amps.
This model is intended to be portable (not permanently mounted on your bike).
A Belt Pouch is available.
$69.95

All NEW Shipping Rebate offer available
(see Order information page for details)
Additional FREE product or Savings offered at checkout for all orders over $30.00
Single Mounted Coax Heat-troller

Technical Specifications: Size - 1.5 in x 2.25 in x .85 in or 38 mm x 57 mm x 21.5 mm.
Switch and LED on PC board on 5ft cord for Panel Mounting. Comes with attached 18 inch battery harness with 15 amp fuse.
Mounts out of sight providing a clean installation

Use with heated liner or gloves, with coax connector, up to a maximum draw of 15 amps.
This model is intended to be permanently mounted on your bike.

$79.95

All NEW Shipping Rebate offer available
(see Order information page for details)
Additional FREE product or Savings offered at checkout for all orders over $30.00
Single Semi Mounted Coax Heat-troller
The perfect product for those that don't want to or can't drill holes in their Bike.

Technical Specifications: The Semi-Mounted Heat-troller has the same specs as the Mounted Heat-troller except for one important feature. The switch comes mounted in a box, 1.5in L x 1.3in W x .9in H, that can be Velcroed on to the fairing or the clutch fluid reservoir so that you don't need to drill a hole in the fairing. Coax Output connector.

Use with heated liner or gloves, with coax connector, up to a maximum draw of 15 amps.
 
$89.95

All NEW Shipping Rebate offer available
(see Order information page for details)
Additional FREE product or Savings offered at checkout for all orders over $30.00

DUAL Coax Plug Heat-troller ™

Dual Portable Coax Heat-troller
This is not a 2 for 1 deal! This Heat-troller is designed for 1 person to control 2 sections of heated clothing only.

Technical Specifications: Size - 1 in x 2 in x 3 in or 25 mm x 50 mm x 75 mm Output: Two Coax Connectors.
Comes with battery harness with covered fuse holder.

Use with heated liner and gloves , with coax connectors, up to a maximum draw of 15 amps.
This model is intended to be portable (not permanently mounted on your bike).
A Belt Pouch is available.
$99.95
Dual Mounted Coax Heat-troller
This is not a 2 for 1 deal! This Heat-troller is designed for 1 person to control 2 sections of heated clothing only.

Technical Specifications: Size - 1 in x 2 in x 3 in or 25 mm x 50 mm x 75 mm. Switch and LED on PC board on 5ft cord for Panel Mounting . With Attached 18 inch battery harness with 15 amp fuse Output: Two Coax Connectors

Use with heated liner and gloves , with coax connectors, up to a maximum draw of 15 amps.
This model is intended to be permanently mounted on your bike.

$119.95

Security 

 ( by product group)

Products 

(by manufacturer)
ABUS Locks  |  BatteryDoc™  |  Bike_Grab™  |  Cobralinks  |  O'Neill  |  Kuryakyn  |  OXFORD Products  |  OnGuard Locks
    ROK Straps  |   Taffynackles  |   XENA

Other pages

Contact

Copyright © 1999 [Patrick Denayer]. All rights reserved.
Revised: November 20, 2005 .