Heated Clothing

Warm&Safe Heated Glove Liners

	Thin inner heated glove liners
	Micro-fiber conductive material means no wires.
	Standard DC-Coax connector will fit to all major brands heated clothing
	8 watts per glove (direct to skin)

Our price

$ 59.95

All NEW Shipping Rebate offer on this product
(see Order information page for details)
Additional FREE product or Savings offered at checkout for all orders over $30.00

New 12v Heated Glove liners from Warm & Safe.
Made from a soft stretchy lycra type material for easy fit in your gloves.
Heat is distributed, to the back of the hand and all fingers, through a microfiber material, you will feel no wires at all. 8 watts of heat in each glove provides just that extra warmth when you need it. These heated glove liners connect to the plugs available in your jacket liner.

Will fit almost any brand of heated clothing with standard Coax plugs.

Available with optional Trilevel controller and Ycord

Powerlet Heated Rider & Rancher Gloves

Heated Clothing designed by Motorcyclists.

	Simple standard sizing.
	Box fingers for added comfort.
	High gauntlet eliminates cold air leakage.
	Engineered to match the ProForm liners and vests, single controller.
	Porelle waterproof / breathable liner.
	Thinsulate liner.
	Premium tanned cowhide.
	Works with other heated clothing manufacturers heated jacket liners.
	24 watts per pair.
	Double heating elements in the thumbs.

You can hook your Powerlet heated gloves directly into the built-in sleeve coax plug of your Warm&Safe, Gerbings, Firstgear, Powerlet or any heated liner. However, if you have a Warm&Safe or Powerlet liner, you can control the gloves together with the jacket as one zone, or control the gloves separate from the jacket.

If you want to operate the gloves without a heated jacket, you need to purchase the Y-wire and Heat-Troller Controller

Black	Tan
$129.00	$129.00

Designed for commuting, touring and extending your riding season, Powerlet heated gloves will provide years of pleasure. All gloves contain double wiring in the thumbs, Porelle and Thinsulate liners. Style, comfort, protection, and warmth. Perfect

These gloves do not come standard with a controller or on/off switch.
Make sure to order either the on/off switch and battery hookup, or electronic Heat-troller.
For short trips (20 minute commute) a on/off switch is ok. However, the gloves will always receive full power. Investing in a Heat-Troller is the better way to go. Heat-Trollers come in single and dual (for 2 separate control zones) and portable, dash or velcro mounted.

Warm & Safe
Classic Rider Gloves
(also sold under the Firstgear brandname)

Heated Clothing designed by Motorcyclists.

	Grade A, top grain drum dyed cowhide construction
	Breathable, waterproof Porelle® insert
	Closed cell foam protective pads all over
	Kevlar Reinforced Protection in Palm
	Double Heat in Thumb. If you are a biker you know why.
	Pre-curved fingers
	Elastic wrist and adjustable Velcro® gauntlet closure
	DC heated glove producing 15 watts of heat in each glove at 12.8 Volts.

You can hook your Warm&Safe heated gloves directly into the built-in sleeve coax plug of your Warm&Safe heated liner. Warm&Safe liners are designed to either control the gloves together with the jacket as one zone, or control the gloves separate from the jacket.

If you want to operate the gloves without a heated jacket, you need to purchase the Y-wire and Heat-Troller Controller

Our Price

$ 119.95

To measure for Gloves: take a tape measure and wrap it around your hand over the knuckles and make a fist. We find these run tight so, if in doubt, go one size up.

Warm & Safe
Ultimate Carbon Heated Gloves
(sold also as Firstgear Carbon Heated Gloves or Powerlet CF-7 Sport Gloves)

	Grade A, top grain drum dyed cowhide construction
	Breathable, waterproof Porelle^® insert
	Carbon fiber protection on molded knuckles
	Closed cell foam protective pads all over
	Kevlar Reinforced Protection in Palm
	Finger-mounted, rubber shield wipe
	Pre-curved fingers
	Elastic wrist and adjustable Velcro® gauntlet closure
	DC heated glove producing 15 watts of heat in each glove at 12.8 Volts

If you want to operate the gloves without a heated jacket, you need to purchase the Y-wire and Heat-Troller Controller

Our Price

$ 149.95

To measure for Gloves: take a tape measure and wrap it around your hand over the knuckles and make a fist. We find these run tight so, if in doubt, go one size up.

Warm & Safe Heated Gloves have a breathable waterproof lining but no insulation. No matter what the weather, you need to feel the bike. Think of a good motorcycle racing glove with carbon protection, leather and Kevlar. Then add very thin wire for heat. Attach a smaller coax plug to the glove so it is not hanging down and getting in the way, and you have the Warm & Safe Ultimate heated rider glove.

VentureHeat MC75 12v Heated Leather Gloves

Key Features

Lifetime warranty on heating elements
Premium lamb skin made with buttery soft genuine lamb skin
3M Thinsulate Insulation
XCT - Kappa Heating System
12-13.8V DC power
1 AMP /12W Each (2AMP/ 24W) Total Draw
Heating to 135F +/-5 @32F
DC coax jack (input)
Plug in directly into the +VENTURE 12V heated jacket without additional wiring
Gel knuckle protection
Gel palm padding for additional protection
Contour Cut requiring less strength & effort on the grip during extended ride
Heats up fingers, thumb, and back of hand
Lifetime warranty on heating elements! **

A battery connect harness and Y-wire (to operate the gloves without a heated liner) are included with each set of Venture Heated gloves.

Optional on/off switch is available for $10 or a Heat-Troller electronic controller for $60.00

Our Price

$149.95

XS	S	M	L	XL
6 1/2" - 7 1/2"	7 1/2" - 8"	8" - 8 1/2"	8 1/2" - 9"	9" - 10"

To measure for Gloves: take a tape measure and wrap it around your hand over the knuckles and make a fist. We find these run tight so, if in doubt, go one size up.

VentureHeat products are plug&play. A multi-stage electronic controller is always included with both Jacket and Pants liners as well as a battery connector. Most other brands will require you to purchase controllers and connectors separate. Connect the Heated Gloves to the jacket sleeves and Heated Insoles to the connectors in the pants and you are good to go. The all inclusive package, combined with the lifetime warranty on heating panels, makes VentureHeat one of the best deals available.

Simply connect your Venture Heated gloves to the Coax connectors in the Jacket sleeves.

Download the 12v Brochure
(pdf)

VentureHeat SG40 & SG43 Battery Heated Gloves

SG40

SG43

Download the
Complete Brochure
(pdf)

No wires to hook up. Ideal for use on Scooters, Motorcycle, Snowmobiles or even walking.
Each glove has it's own rechargeable battery.

Key Features

Heating Time: 2 to 8 Hours
Dual Lithium-ion Battery Pack (300+ charges)
Heating Area: all fingers
Max-High-Medium-Low 4 settings
Water-proof gloves construction
3M Thinsulate Insulation
Viewing Window for easy battery access
1 Year Limited Warranty
Dual Home Charger Included for quick powered up
2000 mAh 7.4V EACH GLOVE (X2)

M	L	XL
8" - 8 1/2"	8 1/2" - 9"	9" - 10"
To measure for Gloves: take a tape measure and wrap it around your hand over the knuckles and make a fist.

SALE Reg. $189.95

$159.95

Finally, a pair of heated gloves that actually work! Base construction starts with a waterproof layer and 3M-Thinsulate^™insulated winter gloves; powered by environmentally friendly, long lasting rechargeable, lithium ion batteries. Your choice of 4 heat settings for each glove. The Xtreme Comfort Technology brings the heat where it really counts: your fingertips

LockItt Home	Heated Clothing Main Page
Heat Trollers	Heated Grips
Back to Accessories main page

Also check these winter products
Electric Heated Grips	Heated Clothing	Winter Gear

Copyright © 1999 - 2009 [Lockitt Group Inc]. All rights reserved. Revised: February 03, 2010 .

Copyright ^©1999 - 2009 [Lockitt Group Inc]. All rights reserved.
Revised: February 03, 2010 .